This particular charger is ideal for bulk charging 24 volt batteries or battery
packs (AGM or wet) up to 10 to 12 amp hour (ah), or as a floating charger (long term
maintenance) for batteries up to about 120 ah. Typical applications include mobility
use (bulk charging small 24 volt systems, or maintenance use for larger packs). This
unit is very handy for travel, with the universal input (world-wide), as long as you
are aware of the amperage limitation. These can be used on 24 volt riding scooters
with sealed lead acid batteries (AGM) as well.
Not for use on true Gel batteries, or Gill aircraft batteries.
Schauer 24 Volt 2 Amp
3 Stage Charger
|Dim (LxWxH):||5.6 x 2.4 x 1.3||3 Stage Charging Profile|
|Actual Weight:||0.9||Mode Indicating L.E.D.|
|Ship Weight:||2.0||Demand Sensing|
|AC Input:||100-240 VAC||Reverse Polarity Protection|
|AC Input:||50/60 Hz||Over Voltage Protection|
|Output Amps:||2.0||Short Circuit Protection|
|Absorption:||29.2 VDC||Thermal Protection|
|Float:||27.0 VDC||True Float Mode|
|Temperature:||32 F to 120 F||Suitable for Sealed Lead Acid (AGM) Batteries|
|Approval:||CE, UL pending||Suitable for Wet Lead Acid Batteries|
|Warranty:||2 Years||Auto-sensing Universal Input|
Schauer battery chargers are microprocessor controlled, fully automatic electronic devices, which use switch-mode technology to change AC input voltage to DC output voltage at much faster rates than traditional ferroresonant type chargers, which allows for a much smaller transformer, and therefore less size and weight, and increased efficiency. Proper maintenance of lead acid batteries keeps them healthy, and increases their life expectancy.