This charger is ideal for bulk charging 24 volt battery packs (wet,AGM or Gel) of about 80 amp hour (ah) and up, or as a floating charger (long term maintenance) for large 24 volt battery systems. This is a durable, aluminum cased unit. Typical applications include industrial carts, smaller forklifts, scissor lifts, and industrial applications. They are excellent for use on deep cycle batteries. The charger is selectable for flooded or sealed lead acid battery types, is fused on the input and output sides, and has flanges for mounting. The JAC2024 features an auto-sensing universal input from 100 to 240 VAC, and is rated for a 100% duty cycle. This unit comes with the industry standard 50 amp Anderson SB50 connector, in gray. Additional connectors are below, or the connector can be cut off and the charger hardwired. Also called JAC2024H.
Schauer 24 Volt 20 Amp
3 Stage Charger
|Dim (LxWxH):||10.5 x 8.125 x 3.375||3 Stage Charging Profile|
|Actual Weight:||8||Mode Indicating L.E.D.|
|Ship Weight:||10||Low Start Voltage (less than 4 volts)|
|AC Input:||100-240 VAC||Reverse Polarity Protection|
|AC Input:||50/60 Hz||Over Voltage Protection|
|Output Amps:||20.0||Short Circuit Protection|
|Absorption:||28.8, 30.0 VDC||Thermal Protection|
|Float:||27.0 VDC||Fan Cooling|
|Temperature:||32 F to 120 F||Auto-sensing Universal Input|
|Approval:||CE. UL pending||For Wet, AGM, & Gel Lead Acid Batteries|
|Warranty:||2 Years||100% Duty Cycle|
Schauer battery chargers are microprocessor controlled, fully automatic electronic devices, which use switch-mode technology to change AC input voltage to DC output voltage at much faster rates than traditional ferroresonant type chargers, which allows for a much smaller transformer, and therefore less size and weight, and increased efficiency. Proper maintenance of lead acid batteries keeps them healthy, and increases their life expectancy.