The Dual Pro Eagle I-3625 36 volt 25 Amp battery charger is an industrial grade 36 volt battery charger, with fan cooling and temperature compensation of the output voltage. The Eagle series are heavy duty, microprocessor controlled, thermally protected battery chargers, encased in a powder coated aluminum case. They are portable or bench top chargers, with a padded handle. They are available with alligator clips, or an Anderson connector of the appropriate size and color. 36 volt systems usually use the 50 amp gray Anderson SB50 connector.
The Dual Pro Eagle series combine the reliability of a heavy duty transformer, with a microprocessor controller, for long term performance and proper battery management. With temperature compensation and computer control, a quicker, more efficient charge cycle results in complete battery charge, better battery life, and less water loss in flooded batteries. They are safe for the sealed lead acid batteries as well. The LED array on the charger case indicates status of the battery.
The Eagle series are made in the US, and feature a 3 year warranty. The I-3625 Eagle 36 volt 25 amp battery charger is suitable for medium to heavy use 36 volt systems, including floor scrubbers, golt carts, personnel carts, cargo carts, scissor lifts, and other industrial equipment. Battery capacities from about 100 amp hours and up are appropriate for this charger, depending on use and desired recharge time.
For more information see our Battery Charging Tutorial
Dual Pro 36 Volt 25 Amp
|Dim (LxWxH):||9.75 x 8.38 x 8.25||Handle|
|Actual Weight:||29.0||Thermal Protection|
|Ship Weight:||30.0||Reverse Polarity Protection|
|AC Input:||115 VAC @ 12 Amps||Temperature Compensation|
|DC Output:||25 Amps||Spark Free Hookup|
|Temp Range:||32F to 113F||Short Circuit Protected|
|Float Voltage:||40.5||LED Readout|
|Approvals:||UL 1564 Pending||Made In USA|
Will ship with the voltage correct Anderson SB50 connector unless