Nordskog Battery Chargers

This page lists various replacement chargers for Nordskog battery chargers by model number, with the appropriate connector. Click on our replacement model listed after your OEM part number.

24 Volt Nordskog Chargers

OEM Number	OEM Amps	Connector	Our Eagle Unit
A2421B87G04	25	Crowsfoot	24 Volt 25 Amp

36 Volt Nordskog Chargers

OEM Number	OEM Amps	Connector	Our Eagle Unit
A2124B87G01	25	Crowsfoot	36 Volt 25 Amp
A2124B87G03	25	Crowsfoot	36 Volt 25 Amp
A2421B87G03	25	Crowsfoot	36 Volt 25 Amp
A25-000-00	25	Crowsfoot	36 Volt 25 Amp
A25-210-00	25	Crowsfoot	36 Volt 25 Amp
A25-250-00	25	Crowsfoot	36 Volt 25 Amp
A3731C76G01	25	Crowsfoot	36 Volt 25 Amp
A7429D51G01	25	Crowsfoot	36 Volt 25 Amp
A7429D52G01	25	Crowsfoot	36 Volt 25 Amp
A7429D52G03	25	Crowsfoot	36 Volt 25 Amp
70358	25	Crowsfoot	36 Volt 25 Amp
70458	25	Crowsfoot	36 Volt 25 Amp
70548	25	Crowsfoot	36 Volt 25 Amp
70818	25	Crowsfoot	36 Volt 25 Amp
70888	25	Crowsfoot	36 Volt 25 Amp

Typical charger connectors available on the above chargers


EZGO™ 1996 and later	Club Car™ 1995 and later	Yamaha MAC connector



Crowsfoot	Anderson SB50/SB175 - Gray	Anderson SB50/SB175 - Red

Dual Pro Nordskog Battery Chargers

The Eagle industrial cart battery chargers by Dual Pro are heavy duty, microprocessor controlled, temperature compensating, thermally protected chargers, encased in a powder coated aluminum case. They can be portable or bench top chargers, with a padded handle. They are the basis of the Nordskog replacement battery chargers that we have available, and come with a crowsfoot connector.

We offer two amp output ranges, medium and high, for 24 volt or 36 volt industrial carts. The medium range (12 amp) is appropriate for a moderately used cart, or long term maintenance for a cart at a seasonal home. The higher range (25 amp) is appropriate for a heavily used cart, either in hours per day or days per week. Running down to the mailbox, or out to the barn a time or two is moderate use. Running around the warehouse all day long, or 18 holes of golf would be heavy use. The point is to be sure the batteries are fully charged routinely, as partially charged batteries are subject to sulphation, which can be a problem over time.

The Dual Pro Eagle series combine the reliability of a heavy duty transformer, with a microprocessor controller, for long term performance and proper battery management. With temperature compensation and computer control, a quicker, more efficient charge cycle results in complete battery charge, better battery life, and less water loss in flooded batteries, which industrial cart battery chargers are frequently used on. They are safe for the sealed lead acid batteries as well. The Eagle model goes into a float mode when the charge is complete, for long term battery maintenance. The LED array on the charger case indicates status of the battery. This feature allows the charger to be left connected to the cart basically indefinitely, which works well for occasionally used carts or carts at a seasonal home or cabin. This prevents the internal discharge any lead acid battery experiences from forming hardened sulphation, which diminishes run time (capacity), even to the point of total failure. Some of the old chargers with timers or simple transformers could not be left on in this fashion, so frequently they are left disconnected from the cart when the cart would be left for a long time, shortening battery life, and diminishing run capacity. This feature alone is worth the cost of an upgraded charger.

The Eagle battery chargers are made in the US, and feature a 3 year warranty. They are suitable for medium to heavy use in 24 and 36 volt industrial carts, personnel carriers, tow carts, cargo carts, and other industrial equipment.

So, take a look at our Nordskog cart charger offerings, and call our tech line if you have any questions, or a special application. We only carry quality, reliable products that will do the job if properly selected.

Be sure to check out our Tutorials!

Home | Nordskog Battery chargers