XCR-20 XTreme Charge 16A Battery Recovery &

Maintenance Charger 100X500

The PulseTech XCR-20 Xtreme Charge™ is a 16 amp Five-Stage Maintenance Charger. Use it for evaluation and testing. A unique test feature evaluates the battery thoroughly during the initial connection to determine the appropriate charge rate based on its size and condition. It tests the battery continually for as long as it is connected to the charger to maintain the optimal bulk or float charge rate. This test step incorporates a "Bad Battery" indication if it determines the battery is faulty and cannot be re-charged. These units come with alligator clips. Formerly known as the WC2200 World Charger, with upgraded microprecessor control.

Pulsetech XCR-20 Pulsetech Part#: XCR-20

Xtreme Charge 100X500
12 Volt 16 Amp Charger/Desulfator


Specifications:  Features:
DIM (LxWxH):15 x 12 x 8 LED Indicators
Charge Current:16 A 10 to 250 AH batteries
Actual Weight:13.0 Automatic
Ship Weight:14.0 Desulfator
Output cord:6 Ft. Safe for Gels
Input:90 - 250 VAC Reverse Polarity Protected
Input:115/230 VAC 1 Year Warranty

Benefits of the Xtreme Charge 100X500

This 20-Amp Charger recovers batteries thought to be dead and useless. Finally, there is a way you can charge and recover dead lead-acid batteries that up until now were thought to be beyond saving.
•State-of-the-art charging system (up to 20 amps) works with 12-volt conventional flooded, maintenance free, AGM and gel cell batteries
•Uses either 110- or 220-volt ac power so it can be used anywhere in the world
•Uses our revolutionary, scientifically-proven ReNew-IT Pulse Technology to safely prevent the buildup of damaging lead-sulfate deposits on the battery plates so batteries can accept, store and release maximum power all the time
•Reduces battery-related downtime, maintenance and costs
•Improves battery performance and increases battery life
•Recovers dead and problem batteries by cleaning damaging lead-sulfate deposits off the battery plates
•Voltage and amperage regulated and microprocessor controlled
•Charges each 12-volt battery to its optimum level by monitoring the battery and adjusting the charging current accordingly
•Automatically switches to Float mode when the battery reaches full charge
•Will not harm your battery
•Helps protect the environment

PulseTech's unique and patented PULSE technology increases the duty and life cycles of any size or type of 12-V lead-acid battery by minimizing the size of the lead sulfate crystals. This allows a battery to accept as much charge as possible. PULSE technology helps ensure that your new batteries will stay in like-new condition while older batteries often improve dramatically. Duty cycles are typically extended from three to five times for all types of lead-acid batteries! Xtreme Charge is ideally suited for AGM and maintenance-free batteries (from less than 10 Ah to over 250 Ah). The combination of patented pulse technology and proprietary charging algorithm typically allows it to charge these high-performance batteries more fully. It also maintains a safe charge profile for traditional batteries including flooded, and gel.

Used extensively by consumers and the U.S. Military worldwide for almost ten years, this technology has been scientifically proven by two major universities to make batteries work harder and last longer than you ever thought possible.

Be sure to see our battery charging tutorial.

Home | PulseTech Desulfators | XCR-20 Xtreme Charge 12 Volt 20 Amp Charger/Desulfator