Samlex SEC-1280UL 12 Volt 80 Amp Battery Charger
The Samlex SEC-1280UL charger is ideal for bulk charging 12 volt batteries (AGM, Gel, or wet) of 300 amp hour (ah) or more, or as a floating charger (long term maintenance) for batteries 200 ah or more. This unit has proportional fan cooling, mute selection for silencing the fan, and temperature compensation. They can be set for true Gel batteries, 115 VAC or 230 VAC input, or to function as a power supply. Typical applications include automotive, marine, RV, communications, military, robotics, etc. These are industrial quality, reliable units, and excellent for commercial and military applications. We have been waiting for these higher amp units for some time. This unit requires a 20 amp or larger circuit when used at 115 VAC input.
Click image for larger picture, "Back" button to return
|
|
|
Part#: SEC-1280UL Samlex 12 Volt 80 Amp 3 Stage Charger $425 USD IN STOCK |
FREE GROUND SHIPPING ON THIS SAMLEX CHARGER. CALL TO UPGRADE TO AIR
CALL IF YOU INTEND TO DRIVE THIS CHARGER WITH AN INVERTER GENERATOR. CALL IF YOU NEED MORE INFO.
|
Add to Cart
|
View Cart
|
| Specifications: | Features: | |
| Dim (LxWxH): | 15 x 9.61 x 3.82 | Advanced Switch-mode Design |
| Actual Weight: | 15.0 | 3 Stage Charge Profile |
| Ship Weight: | 16.0 | Temperature Compensation |
| AC Input: | 120/230 VAC | Selectable for GEL |
| AC Input: | 15.9A/8.6A | Selectable AC Voltage Input |
| AC Input: | 50/60 Hz | Selectable - Battery with Load |
| Output Amps: | 80.0 | Short Circuit Protection |
| Absorption: | 14.4 VDC (wet/AGM) | Reverse Polarity Protection |
| Absorption: | 14.0 VDC (Gel) | Thermal Protection |
| Absorption: | 13.5 VDC (deactivated) | Over Current Protection |
| Float: | 13.5 VDC | Over Temperature Protection |
| Temperature: | 0 to 40C | Proportional Fan Cooling |
| Approval: | ETL/UL | True Float |
| Warranty: | 2 Years |
Accessories you may like:
|
|
|
RC-900 Remote Control $27 |
2 Gauge Charger Cable Set $39 |
|
Add to Cart
|
Add to Cart
|
Samlex Battery Chargers
Samlex battery chargers are microprocessor controlled, fully automatic electronic devices, which use switch-mode technology to change AC input voltage to DC output voltage at much faster rates than traditional ferroresonant type chargers, which allows for a much smaller transformer, less size and weight, and increased efficiency. Samlex switch-mode chargers also will function as a power supply with a battery in the system, and the proper dip switch setting. These units are switch selectable for AC input voltage, battery type (wet, AGM, Gel), and power supply operation (battery with load). The 'battery with load' setting deactivates the boost mode, so the charger can function as a power supply without entering the elevated voltage level, which can damage a battery if applied for long periods. Proper maintenance of lead acid batteries keeps them healthy, and maximizes their life expectancy.
Frequently asked questions about battery charging