The Dual Pro Sportsman SS3 marine battery charger is a 3 bank, independent output,
10 amp 12 volt per bank, temperature compensation charger. This unit will be built with 220 VAC input. The Sportsman series are heavy duty, waterproof, and fully potted for vibration resistance.
They feature powder coated aluminum bases suitable for salt water environments. The independent output
battery chargers have a separate positive
and negative connector for each bank, and a separate microprocessor for each bank
which controls the charging algorithm. They can be used on batteries of
differing state of charge, age, size, or type (sealed, flooded). This works well in
marine applications with a starting battery and a trolling setup. It also is suitable
for series strings of 12 volt batteries for 24 or 36 volts. This is useful in 24 volt or 36 volt
applications where one of the 12 volt batteries in the string is supplying some
12 volt loads (like communications, radar, etc.), and the batteries end up with an
imbalance. A straight output 24 volt or 36 volt charger used in this situation would
not properly charge the batteries and fix the imbalance.
The Sportsman SS3 three output 10 amp battery charger is appropriate for 12 to 36
volt applications where wet or harsh environments exist. They have provisions
for mounting (permanent installation), and are built for water, vibration, and
temperature. They are used in boating applications, like boats with a starting battery
and a trolling motor system. The SS3 is a well built charger, which can be mounted
onboard for years of dependable service. They are built in the USA. Multiple outputs can be connected to the same battery to increase
amperage.
For more information see our Battery Charging Tutorial
Part#: SS3/220 Dual Pro 12/24/36 Volt Sportsman 220 Charger $395 USD IN STOCK |
Add to Cart
|
View Cart
|
Specifications: | Features: | |
Dim (LxWxH): | 11.5 x 8.0 x 5.0 | Fully Waterproof |
Actual Weight: | 17.0 | Overcharge Protection |
Ship Weight: | 20.0 | Reverse Polarity Protection |
AC Input: | 220 VAC | Temperature Compensation |
Output: | 10/10/10 Amps | Ignition Protected |
Banks: | 3 | Short Circuit Protected |
Approvals: | CE | LED Readout |
Approvals: | USCG 33 CFR183.410 | Made In USA |
Warranty: | 3 Years | Float Mode |
$24 Dual Pro 5 Foot Charger Cable Extension CCx5 |
$29 Dual Pro 10 Foot Charger Cable Extension CCx10 |
$33 Dual Pro 15 Foot Charger Cable Extension CCx15 |
Add to Cart
|
Add to Cart
|
Add to Cart
|
$89 Dual Pro Starting and Trolling Battery Fuel Gauges BFGOM11 |
Any of the following add about 2 days build time, and must be called in:
For portable units, add $10.
Available with microprocessor for true gel or lithium batteries.