The Dual Pro PS2 marine battery charger is a dual 12 volt output,
15 amp per bank, temperature compensating battery charger.
The Pro series chargers feature powder coated aluminum bases suitable for
salt water environments, are fully waterproof,
and potted for vibration resistance. The independent output battery chargers have separate positive
and negative connections for each bank, and a separate charge algorithm microprocessor
for each bank. Therefore, the connected batteries may be of differing age, size,
charge level, or type (sealed, flooded). This is beneficial in marine applications
with a trolling motor battery and a starting battery. It also is suitable for a 24 volt
series strings of two 12 volt batteries. This is applicable in situations like 24 volt systems where one of the
12 volt batteries in the string is used for 12 volt loads (like radios, electronics,
etc.), where the batteries end up imbalanced. A straight 24 volt output charger used
in this situation would see the combined voltage, and overcharge the battery that was
not used for the 12 volt load.
The Pro Charger PS2 two output 15 amp battery charger is appropriate for 12 and 24
volt applications where wet or harsh environments are
usual, or where 30 amps total output is desired. They have flanges for easy mounting,
and are water, vibration, and temperature safe. They will handle flooded and AGM
batteries, mixed and matched, and can be ordered with true gel or lithium battery specific
microprocessors. The Pro series 15 amp marine battery charger series is preferred by tournament
fishermen, as the amp rate is sufficient for a reasonably quick recharge in an
afternoon or evening. They are US made well built chargers, which can be mounted and hard
wired in severe duty applications. The outputs can be connected to the same battery for increased
amperage.
For more information see our Battery Charging Tutorial
Part#: PS2 Dual Pro 12 Volt PS2 Charger $322 USD IN STOCK |
Add to Cart
|
View Cart
|
Specifications: | Features: | |
Dim (LxWxH): | 9.5 x 8.25 x 6.0 | Fully Waterproof |
Actual Weight: | 17.0 | Overcharge Protection |
Ship Weight: | 19.0 | Reverse Polarity Protection |
AC Input: | 115 VAC | Temperature Compensation |
Output: | 15/15 Amps | Ignition Protected |
Banks: | 2 | Short Circuit Protected |
Approvals: | CE | LED Readout |
Approvals: | USCG 33 CFR183.410 | Made In USA |
Warranty: | 3 Years | Float Mode |
$25 Dual Pro 5 Foot Charger Cable Extension CCx5 |
$29 Dual Pro 10 Foot Charger Cable Extension CCx10 |
$34 Dual Pro 15 Foot Charger Cable Extension CCx15 |
Add to Cart
|
Add to Cart
|
Add to Cart
|
$89 Dual Pro Starting and Trolling Battery Fuel Gauges BFGOM11 |
Any of the following add about 2 days build time, and must be called in:
For portable units, add $10.
Available with microprocessor for true gel or lithium batteries.