ChargingChargers

INDUSTRIAL CART CHARGERS



The Eagle industrial cart battery chargers by Dual Pro are heavy duty, microprocessor controlled, temperature compensating, thermally protected chargers, encased in a powder coated aluminum case, and are available in 24 volt, 36 volt, and 48 volt output. They can be portable or bench top chargers, with a padded handle. They come with a variety of connectors to deal with the many types of industrial carts and transportation carts. There are early and late EZGO™ connectors, generic Anderson SB type connectors in 50 amp and 175 amp, Club Car™ round connector for 48 volt 1995 and later carts, a crowsfoot connector that applies to some Club Car, EZGO, and Yamaha applications, and a 'MAC' connector for 1996 and later 48 volt Yamaha carts.

We offer two amp output ranges, medium and high, for 24 volt, 36 volt and 48 volt carts. The medium range (9 and 12 amp) is appropriate for a moderately used cart, or long term maintenance for a cart in a seasonal application. The higher range (18 and 25 amp) is appropriate for a heavily used cart, either in hours per day or days per week. Running down to the mailbox, or out to the barn a time or two is moderate use. Running around the warehouse all day long, or 18 holes of golf would be heavy use. The point is to be sure the batteries are fully charged routinely, as partially charged batteries are subject to sulphation, which can decrease capacity (run time) over time.

The Dual Pro Eagle series combine the reliability of a heavy duty transformer, with a microprocessor controller, for long term performance and proper battery management. With temperature compensation and computer control, a quicker, more efficient charge cycle results in complete battery charge, better battery life, and less water loss in flooded batteries, which industrial cart battery chargers are frequently used on. They are safe for the sealed lead acid batteries as well. Eagle chargers turn off completely when the charge is finished, and reactivate the charge sequence if battery voltage drops to the factory preset level. The LED array on the charger case indicates status of the battery. This shut off feature allows the charger to be left connected to the cart basically indefinitely, which works well for occasionally used carts or carts at a seasonal home or cabin. This prevents the internal discharge any lead acid battery experiences from forming hardened sulphation, which diminishes run time (capacity), even to the point of total failure. Some of the old chargers with timers or simple transformers could not be left on in this fashion, so frequently they are left disconnected from the cart when the cart would be left for a long time, shortening battery life, and diminishing run capacity. This feature alone is worth the cost of an upgraded charger.

The Eagle battery chargers are made in the US, and feature a 3 year warranty. They are suitable for medium to heavy use in 24, 36, and 48 volt industrial carts, floor scrubbers, cargo carts, scissor lifts, and other industrial equipment.

So, take a look at our cart charger offerings, and call our tech line if you have any questions, or a special application. We only carry quality, reliable products that will do the job if properly selected.

Accessories

12 Volt Digital Volt Meters
$49
Digital Volt Meter
24, 36, 48 Volt

For more information, see our battery charging tutorial.

Frequently asked questions about battery charging


Be sure to check out our Tutorials!



Home | Industrial Cart Battery Chargers
ChargingChargers