ChargingChargers


Club Car Battery Chargers

This page lists various replacement chargers for Club Car battery chargers by model number, with the appropriate connector. Click on our replacement model listed after your OEM part number.



36 Volt Club Car Chargers

OEM NumberOEM AmpsConnectorOur Eagle Unit
1016464-0120,21Crowsfoot 36 Volt 25 Amp
744525Crowsfoot 36 Volt 25 Amp
101165525Crowsfoot 36 Volt 25 Amp
101380725Crowsfoot 36 Volt 25 Amp


48 Volt Club Car Chargers

OEM NumberOEM AmpsConnectorOur Eagle Unit
1018022-0120,21Round ClubCar 48 Volt 18 Amp



Typical charger connectors available on the above chargers



EZGO Plug Club Car Plug Yamaha/MAC Plug

EZGO™ 1996 and later

Club Car™ 1995 and later

Yamaha MAC connector
 
 
Crowsfoot Plug SB50 Gray SB50 Red

Crowsfoot

Anderson SB50/SB175 - Gray

Anderson SB50/SB175 - Red



Dual Pro Club Car Battery Chargers


The Eagle industrial cart battery chargers by Dual Pro are heavy duty, microprocessor controlled, temperature compensating, thermally protected chargers, encased in a powder coated aluminum case. They can be portable or bench top chargers, with a padded handle. They are the basis of the Club Car replacement battery chargers that we have available, and come with a couple of connectors to deal with the types of industrial carts made by Club Car. There is a 3 pin round connector specifically for Club Car, and a crowsfoot connector.

We offer an 18 and 25 amp output range, for 36 volt to 48 volt industrial carts. The higher range (18 and 25 amp) is appropriate for a heavily used cart, either in hours per day or days per week. Running down to the mailbox, or out to the barn a time or two is moderate use. Running around the warehouse all day long, or 18 holes of golf would be heavy use. The point is to be sure the batteries are fully charged routinely, as partially charged batteries are subject to sulphation, which can be a problem over time.

The Dual Pro Eagle series combine the reliability of a heavy duty transformer, with a microprocessor controller, for long term performance and proper battery management. With temperature compensation and computer control, a quicker, more efficient charge cycle results in complete battery charge, better battery life, and less water loss in flooded batteries, which industrial cart battery chargers are frequently used on. They are safe for the sealed lead acid batteries as well. The Eagle models go into a float mode when the charge is complete, for long term battery maintenance. The LED array on the charger case indicates status of the battery. This feature allows the charger to be left connected to the cart basically indefinitely, which works well for occasionally used carts or carts at a seasonal home or cabin. This prevents the internal discharge any lead acid battery experiences from forming hardened sulphation, which diminishes run time (capacity), even to the point of total failure. Some of the old chargers with timers or simple transformers could not be left on in this fashion, so frequently they are left disconnected from the cart when the cart would be left for a long time, shortening battery life, and diminishing run capacity. This feature alone is worth the cost of an upgraded charger.

The Eagle battery chargers are made in the US, and feature a 3 year warranty. They are suitable for medium to heavy use in 36 and 48 volt Club Car carts, personnel carriers, tow carts, cargo carts, and other industrial equipment.

So, take a look at our Club Car cart charger offerings, and call our tech line if you have any questions, or a special application. We only carry quality, reliable products that will do the job if properly selected.





Be sure to check out our Tutorials!



Home | Club Car Battery chargers, Clubcar
ChargingChargers