The 25 Watt SolarPulse charger/desulfator combines ReNew-IT Pulse Technology with an exceptional charging system. This unit has been used by the military for years, and now is available in a commercial package. These are expensive, but exceptional kits. ReNew-It Technology safely prevents the main cause of battery problems and failure: sulfation buildup on lead-acid battery plates. Used extensively by the consumers and the U.S. Military worldwide for over ten years, this technology has been scientifically proven by two major universities to make batteries work harder and last longer than you ever thought possible. The 25 watt SolarPulse is designed to ensure maximum battery performance on 12-volt lead-acid batteries. This unit desulfates and charges with 25 watts of solar power (up to 1.6 amps). This unit is ideal for virtually any kind of vehicle or equipment including cars, trucks, delivery trucks, boats, emergency vehicles, generators and much more. It comes with lugs that connect directly to the battery terminals. Optional suction cup mounting kit below.
Used extensively by the consumers and the U.S. Military worldwide for almost ten years, this technology has been scientifically proven by two major universities to make batteries work harder and last longer than you ever thought possible.
Part#: SP-25 SolarPulse 735X325 25 Watt Solar Desulfator $900 |
Specifications: | Features: | |
Panel (LxWxH): | 21.25 x 17.75 x .125 | LED Indicator |
Controller (LxWxH): | 5.25 x 2.50 x 1.3 | Reverse Polarity Protected |
Actual Weight: | 6.5 | Weatherproof |
Ship Weight: | 8.0 | Quick Disconnect |
Box to Lugs: | 32 inches | |
Box to Panel: | 25 Ft. | |
Charge Current: | 1.6 A |
There are three other SolarPulse models available: 2 Watt (735X302), 5 Watt (735X305), and a 6-Watt ERV unit (735X613). The 6-watt model is ideal for emergency rescue and law enforcement vehicles because it has a unique rectangular solar panel designed to easily mount on any light bar. We have used pulse technology (the patented process) for years, and have verified the effectiveness when properly applied. Lead acid batteries, including the sealed types, AGM and GEL, are subject to sulfation as part of the discharge cycle, either when you use the battery, or when the battery sits unused and unattended for periods of time. This sulfation can harden over time, and prematurely reduce the capacity of the battery, or destroy it altogether. Pulse technogy prevents hardened sulfation from occuring or staying on the plates of a new battery when installed, or can reverse the sulfation process on batteries that have been abused, i.e. left discharged or sitting for periods of time. There is a chemical life for lead acid batteries as well, so if the battery is already 5 years old, you may not be able to recover them if abused, or get significant improvement. New battery installations, or batteries that are 2 to 3 years old and not properly maintained, are the prime situations for utilizing Pulsetech products.