The Soneil 2416SRF 24 Volt 8 Amp AGM/GEL Battery Charger is particularly suited for mobility applications like wheelchairs or scooters that use the standard 3 pin XLR connector (EXCEPT Everest-Jennings chairs). These fan cooled units are specifically suited for mobility applications. Proper maintenance of lead acid batteries keeps them healthy, and increases their life expectancy. The float mode in these chargers allows them to be connected whenever the chair or scooter is not in use, keeping the depth of discharge in the batteries to a minimum. This increases battery life. This is a durable, aluminum cased unit. The 2416SRF is excellent for use on deep cycle batteries, from about 55 amp hours to 75 or 80 amp hours. The Soniels are considered a premium mobility charger, and carry a 2 year warranty.
Click image for larger picture, "Back" button to return
Part#: SON2416SRF Soneil 24 Volt 8 Amp Charger with XLR Plug $164 |
Specifications: | Features: | |
Dim (LxWxH): | 8.0 x 3.75 x 2.5 | Multi Stage Charging Profile |
Actual Weight: | 3.2 | Mode Indicating L.E.D. |
Ship Weight: | 4.0 | Demand Sensing |
AC Input: | 100-240 VAC | Reverse Polarity Protection |
AC Input: | 47-63 Hz | Over Voltage Protection |
Output Amps: | 8.0 | Short Circuit Protection |
Absorption: | 28.8 VDC | FCC Class B |
Float: | 27.4 VDC | True Float Mode |
Temperature: | 32 F to 120 F | Soft Start/Stop |
Approval: | UL,CUL,CE | For AGM,Gel,Wet Cells |
Warranty: | 2 Years | Switchable Input |
Soneil battery chargers are microprocessor controlled, fully automatic electronic devices, which use switch-mode technology to change AC input voltage to DC output voltage at much faster rates than traditional ferroresonant type chargers, which allows for a much smaller transformer, and therefore less size and weight, and increased efficiency. Proper maintenance of lead acid batteries keeps them healthy, and increases their life expectancy.
Stage 1: Deep Discharge Charging Pulse Mode: LED Flash
The charger starts charging at 0.5V and give pulse current up to 5V. This has
effect of removing loose sulphation formed during deep discharge state of the
battery.
Stage 2: Constant Current Mode (CC): LED Yellow
The charger changes to constant current 2A. When the battery voltage reaches up
to 28.8V, the charging stage changes from CC (Constant Current) to CV
(Constant Voltage) mode.
Stage 3: Constant Voltage Mode (CV): LED Yellow
The charger holds the battery at 28.8V and the current slowly reduces. When the
current reaches 0.5CC (CC=Constant Current), this point is called the Switching
Point. The Switching Point is one of the great features of this battery charger in that it
can adjust the current automatically according to battery capacity.
Stage 4: Standby Voltage Mode: LED Green
The charger maintains the battery voltage at 27.6V and current slowly reduces to
zero. Charger can be left connected indefinitely without harming the battery.
Recharging: LED Yellow
If the battery voltage drops down below 27.6V, the charger changes from any mode to
Constant Current mode and restarts charging. The charging cycle will go through
Stage 2 to Stage 4.
Frequently asked questions about battery charging