Soneil 2408SRF 24 Volt 4 Amp Battery Charger

The Soneil 2408SRF 24 Volt 4 Amp AGM/GEL Battery Charger is particularly suited for mobility applications like wheelchairs or scooters that use the standard 3 pin XLR connector (EXCEPT Everest-Jennings chairs). These fan cooled units are specifically suited for mobility applications. Proper maintenance of lead acid batteries keeps them healthy, and increases their life expectancy. The float mode in these chargers allows them to be connected whenever the chair or scooter is not in use, keeping the depth of discharge in the batteries to a minimum. This increases battery life. This is a durable, aluminum cased unit. The 2408SRF is excellent for use on deep cycle batteries, from about 30 amp hours to 55 hours. The Soniels are considered a premium mobility charger, and carry a 2 year warranty.

Part#: SON2408SRF Soneil 24 Volt 4 Amp Charger with XLR Plug $108

SOLD IN CASE QUANTITIES (12)OR MULTIPLES ONLY

Soneil Battery Chargers

Soneil battery chargers are microprocessor controlled, fully automatic electronic devices, which use switch-mode technology to change AC input voltage to DC output voltage at much faster rates than traditional ferroresonant type chargers, which allows for a much smaller transformer, and therefore less size and weight, and increased efficiency. Proper maintenance of lead acid batteries keeps them healthy, and increases their life expectancy.

Stage 1: Deep Discharge Charging Pulse Mode: LED Flash
The charger starts charging at 0.5V and give pulse current up to 5V. This has effect of removing loose sulphation formed during deep discharge state of the battery.
Stage 2: Constant Current Mode (CC): LED Yellow
The charger changes to constant current 2A. When the battery voltage reaches up to 28.8V, the charging stage changes from CC (Constant Current) to CV (Constant Voltage) mode.
Stage 3: Constant Voltage Mode (CV): LED Yellow
The charger holds the battery at 28.8V and the current slowly reduces. When the current reaches 0.5CC (CC=Constant Current), this point is called the Switching Point. The Switching Point is one of the great features of this battery charger in that it can adjust the current automatically according to battery capacity.
Stage 4: Standby Voltage Mode: LED Green
The charger maintains the battery voltage at 27.6V and current slowly reduces to zero. Charger can be left connected indefinitely without harming the battery.
Recharging: LED Yellow
If the battery voltage drops down below 27.6V, the charger changes from any mode to Constant Current mode and restarts charging. The charging cycle will go through Stage 2 to Stage 4.

Frequently asked questions about battery charging

Be sure to check out our Tutorials!